NF KP3000GS, Instruction Manual

Page: 32 / 279

2.4 Grounding and Power Connections
KP3000GS 13
3. Attach the resin-molded power input terminal cover and the power input cable holder. Direct
the folded part of the resin-molded power input terminal cover to the upper side of the product.
LINE LINE
4. Ensure that the power switch of this product is turned off, and then connect the power input
cable to the single-phase distribution board.
LINE OUTPUT
L N Hi Lo
SENSE
Hi
INPUT
Lo
Distribution board
(Protective grounding)
 Do not use this product when the resin-molded terminal cover is removed. Otherwise, an electric
shock might occur.
 Be sure to check phases L and N are correctly connected between this product and the
distribution board.
WARNING
CAUTION