NF KP3000GS, Instruction Manual

Page: 33 / 279

2. Preparation before Use
PROGRAMMABLE AC/DC POWER SOURCE 14
2.5 Output Cable Connection
 Before connecting, check the followings.
 Before touching the output terminal, be sure to turn off the power switch of this product, and cut
the power to the distribution board. Otherwise, an electric shock might occur.
 The output terminals that can be grounded are the Lo terminals. Do not ground the Hi terminals.

About output terminal
Table 2-6 Output Terminals
KP3000GS
Screw M6
 Connection procedure
1. Remove the resin-molded output terminal cover and the output cable holder of the output
terminal.
OUTPUT
Hi
Lo
OUTPUT
Hi
Lo
OUTPUT
Hi
Lo
OUTPUT
Hi
Lo
WARNING
CAUTION