NF KP3000GS, Instruction Manual

Page: 120 / 279

4.3 Using Power Fluctuation Testing (Simulation) Function
KP3000GS 101
3. When [Stop] soft-key is pushed while simulation is executed, the execution transitions to the
output that is set in the Initial Step, and then simulation is terminated.
--------
Notes ------------------------------------------------------------------------------------------------------------
 In the output off state, the simulation cannot be started.
 The output on/off phase setting is invalid for the Simulation.
-----------------------------------------------------------------------------------------------------------------------------
 Returning to Simulation Edit View
If you push the [Edit] soft-key, the execution transitions back to the Simulation Edit View.
4.3.8 Saving Simulation
-------- Notes ------------------------------------------------------------------------------------------------------------
 Simulation cannot be saved in the Simulation Control View.
-----------------------------------------------------------------------------------------------------------------------------