NF KP3000GS, Instruction Manual

Page: 215 / 279

6. Remote Control
PROGRAMMABLE AC/DC POWER SOURCE 196
5. Use a GPIB cable to connect this product to the computer. The connector is on the rear of this
product. Turn off this product and the computer before connecting or disconnecting the cable.
--------
Notes ------------------------------------------------------------------------------------------------------------
 Avoid use in a place under electrically noisy environment.
 Before connecting or disconnecting the connector, turn off the power to all devices on the bus.
 When using the GPIB, turn on the power to all devices on the bus.
 Ensure that the total cable length is within 20 meters.
 Ensure that the length of one cable is within 4 meters.
 Do not set the same address as the one used for any other device connected to the same bus.
Otherwise, the product cannot communicate properly.
 Binary transmission is not supported.
 Query for the main unit status byte using a serial poll is not supported.
-----------------------------------------------------------------------------------------------------------------------------
6.1.4 LAN
For the interface specifications, see 10.27 .
For how to set LAN interface, refer to the Instruction Manual (Remote Control).
 Operation procedure
1. Connect this product and computer with LAN cable. LAN connector is available on the rear of this
product. Turn off this product and the computer before connecting or disconnecting the cable.
2. Press the MENU key to move to the root menu, and then select [System]. The system setting
window opens.