NF KP3000GS, Instruction Manual

Page: 258 / 279

10.19 Simulation
KP3000GS 239
10.19 Simulation
This allows you to simulate power line abnormalities, such as blackout, voltage rise, voltage drop,
abrupt phase change, and abrupt frequency change. It can be used only for AC, sine wave, and
AC+DC-INT. Note that it does not support IEC or other standards test.
KP3000GS
Number of memories 5 (non-volatile)
Number of steps 6 (Initial, Normal 1, Trans 1, Abnormal, Trans 2, Normal 2)
Setting range of Step
Time
0.0010 s to 999.9999 s (0 s is available only for the Transition Step)
Parameter Output range
(The above item is common within the Simulation)
AC voltage
Frequency
Waveform (sine wave only)
Start Phase (excluding the Transition Step)
Stop Phase (excluding the Transition Step)
Synchronous step output (2bit)
Trigger output
Repeat count (1 to 9999 times or infinite)
初期 定常1 移行1 異常 移行2 定常2 初期
トリガ設定例
ステップ同期1出力例
ステップ同期2出力例
Initial Initial
Normal1 Normal2 Trans1 Trans2 Abnormal
Trigger setting example
Step sync 1 output example
Step sync 2 output example
Simulation control Start
Stop