Setting
Description
Sync Offset Slave
Depending on variables such as the speed of your CPU, your audio inter-
face, your MIDI interface and the
Latency
value you selected in the Audio
experience a lack of synchronization between MASCHINE and the external
MIDI Master. To compensate, you can adjust this
Sync Offset Slave
value
in milliseconds. An easy way to do that is to play a 4/4 kick drum pattern
or a metronome sound on both MASCHINE (see chapter
on how to activate the metronome) and the
external MIDI Master and mix them together moving the slider until they
are played at exactly the same time. As soon as you can hear a flanger-like
effect, you know you are close to the correct Sync Offset Slave value. Keep
on adjusting the
Sync Offset Slave
control until you can neither hear the
flanging effect nor two separate signals.
Input Channel
Use this to select the MIDI channel you want MASCHINE to receive MIDI
messages on. This can be used to limit MIDI input sent by the external
sync master device. The
Omni
setting will allow the MASCHINE software to
receive messages on all 16 channels at one.
2.4.2
Preferences – Defaults Page
The
Defaults
page allows you to define a few default settings that will be used for every new
Project. To display the
Defaults
page click the
Defaults
tab on the left.
Basic Concepts
Preferences
MASCHINE MIKRO MK2 - Manual - 37
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
