Native Instruments MASCHINE MIKRO MK2, Manual

Page: 305 / 359

Parameter Description
Mode Here you can select either Split , Grid or Detect :
Split mode: The Sample will be sliced into equally spread Slices.
Grid mode: The Sample will be sliced according to note values.
Detect mode: The Sample will be sliced according to its transients.
Slices Depending on the mode selection you have made (see Mode above), you can ad-
just the following here:
In Split mode: Slices lets you choose the amount of Slices: 4, 8, 16 or 32.
In Grid mode: Length lets you choose the length of the Slices in note values:
4th, 8th,16th or 32nd notes.
In Detect mode: Sens lets you adjust the sensitivity of the transient detection.
Higher values will cause more Slices to be detected because more transients will
be recognized, lower values will result in less Slices. This parameter should be
adjusted until all the musically significant slices are being detected in the wave-
form.
(2) Tempo settings
Parameter Description
Auto If this radio button is selected, MASCHINE will calculate the tempo automatical-
ly.
Man If this radio button is selected, you can enter the tempo in BPM manually.
BPM If you have selected Auto , you can choose between the tempo that MASCHINE
detected, or half or double of that tempo. If you have selected Man , you can ad-
just the tempo manually.
(3) ADD and REMOVE
Element Description
ADD Adds a Slice within the selected Slice according to the Slicing Mode settings.
REMOVE Removes the selected Slice.
(4) APPLY and Loop Dragger
Sampling and Sample Mapping
Controlling Sampling from the Software
MASCHINE MIKRO MK2 - Manual - 305