two functions at your disposal: Sound MIDI Batch Setup (for whole Groups) and Sound
MIDI Settings (for individual Sounds). These are described in section
, respectively.
▪
You can control the parameters of your Groups and Sounds via MIDI CC messages thanks
to the Macro Controls (this is covered in section
5.1.3, Group – Macro Properties (MCR)
You can also trigger your Scenes using MIDI messages. Please refer to section
for more info on this.
You can select a particular MIDI channel on which MIDI messages will be received in
Pref-
erences > General > MIDI > Input Channel
. See section
Outgoing MIDI
Your Groups and Sounds can also send MIDI data:
▪
You can configure your Sounds for sending MIDI notes instead of generating audio (see
section
4.9.3, MIDI Output from Sounds
).
▪
When MASCHINE is used as plug-in, you can record the notes you play on the pads as
MIDI notes in your host application (see section
4.9.1
Sound MIDI Batch Setup
The Sound MIDI Batch Setup is a powerful feature that can be used both for incoming and
outgoing MIDI data:
▪
Mapping incoming MIDI notes to an entire Group: You can set up how all Sounds of the
selected Group respond to MIDI.
▪
Sending MIDI notes to the host application when MASCHINE is used as plug-in: This al-
lows you to directly record MIDI patterns in your host while playing on your controller.
To record the MIDI notes in your host application, you need to configure your host so that it
receives the MIDI data sent by the MASCHINE plug-in. Please refer to the documentation
of your host application for more details.
Working with Sounds
Using MIDI with Sounds
MASCHINE MIKRO MK2 - Manual - 132
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
