1.
Press the Group button (
A
–
H
) of a Group you want to use Pad Link in.
2.
Hold the
PAD MODE
button.
3.
Deselect
KEYBD
(Keyboard) if it is already selected, then press the pad you want to as-
sign to a Pad Link group.
4.
On the left display, select the desired Pad Link group for this pad using Knob 1 (
LINK
GRP
).
5.
Set the pad to Master or Slave mode using Knob 2 (
LINK MODE
).
6.
Repeat the process with other pads to link each pad to a Pad Link group.
Releasing a Pad from a Pad Link Group
To release a pad from a Pad Link group:
1.
Press the Group button of the pad you want to release from its Pad Link group.
2.
Hold the
PAD MODE
button.
3.
Deselect
KEYBD
(Keyboard) if it is already selected, then press the pad with the Sound
you want to remove from a Pad Link group.
4.
On the left display, change the Pad Link to
OFF
using Knob 1.
5.
Repeat the process to remove other pads from a Pad Link group.
6.1.4
Recording the Pads
You can easily record beats with the pads:
1.
Press
PLAY
to start the sequencer.
The
PLAY
button lights up.
2.
Press
REC
to enable Record mode.
The
REC
button lights up.
Working with Patterns (Controller)
Creating Patterns
MASCHINE MIKRO MK2 - Manual - 168
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
