manualshive.com logo in svg

Native Instruments MASCHINE MIKRO MK2, Manual

Share
Download
Native Instruments MASCHINE MIKRO MK2 Manual Download Page 112

The Parameter menu displaying plug-in-specific clear, cut, and paste editing commands.

Parameter Menu Entry

Description

Assign Macro Control

Allows to select and assign a Macro Control to this parameter. See section

↑

5.1.3, Group – Macro Properties (MCR) and Macro Controls

 for more info.

Learn Plug-in Parameter

Removes any existing parameter assignment to the knob and enter Learn
mode for that knob. This allows you to quickly assign a new parameter by
moving it in the plug-in user interface.

Clear Plug-in Parameter

Removes the existing parameter assignment for this knob.

Cut Plug-in Parameter

Removes the existing parameter assignment for this knob and copies it to the
clipboard.

Paste Plug-in Parameter

Pastes the parameter assignment on this knob and removes it from the clip-
board. A parameter assignment can only be pasted once.

A plug-in parameter can be assigned to one knob only!

4.3.4

Using VST/AU Plug-in Presets

 

For some of your VST/AU plug-ins, you might already have a set of factory or user presets (or
patches, programs, etc.) that you like to use. MASCHINE lets you directly load these presets
into  Module  slots  and  save  them  as  Module  presets.  These  tasks  can  be  done  in  the  MA-
SCHINE software only. Saving your plug-in presets as Module presets will notably allow you to
access them from the MASCHINE Browser.

Working with Sounds

Using VST/AU Plug-ins

 

MASCHINE MIKRO MK2 - Manual - 112

Summary of Contents for MASCHINE MIKRO MK2








































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands