Parameter
Description
LENGTH
(Beat mode with Auto
Detection enabled only)
If Auto Detection is enabled, you can define the length of the target audio (in
bars). Please note that any change to the
SRC
value (see above) will be automati-
cally mirrored by this
LENGTH
value. Once you have set the number of bars in the
source audio, you can set here another number of bars, thereby dividing or multi-
plying the tempo of the target audio. Available values are 1/16, 1/8, 1/4, 1/2, 1,
2, 4, and 8 bars, as well as the corresponding triplet values.
SPEED
(Free mode only)
Adjusts the new tempo relatively to the original tempo (in percentage). The mini-
mum value is 10 %.
In Beat mode, if you set a target tempo that is smaller than a tenth of the original tempo,
Button 6 will show an exclamation mark (
!
) next to
STRETCH
and the button will be disa-
bled. Set a higher target tempo to enable the button again!
Once you have set the parameters to the desired values, press Button 6 (STRETCH) to apply
the pitch shifting and/or time stretching to the selected region in the Sample.
11.1.3 Slicing a Sample (Hardware)
Press
SAMPLING
and then Button 3 to show the
SLICE
page. The
SLICE
page allows you to
prepare Slices that you can then export to different notes of the same Sound or to different
Sounds of the same Group. The right display shows you the waveform of the Sample with the
Slices pictured as vertical lines. Depending on how you set up the Slice settings, the Slice
Markers will move. Use Knob 5 and 6 to navigate and zoom the Slices!
If your Sound contains more than one Sample, all your actions in the
SLICE
page will af-
fect the Sample of the Zone currently selected in the
MAP
page! See
for more info on selecting Zones in the
MAP
page.
You can press the lit pads to play and select each of the first 16 Slices individually. If a pad is
unlit no Slice is assigned. The fully lit pad indicates the selected Slice. When a Slice is played
back, the Playhead indicator (vertical line) shows you the current play position within the
Slice’s waveform on the right display.
Sampling and Sample Mapping
Controlling Sampling from the Hardware
MASCHINE MIKRO MK2 - Manual - 287
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
