In Beat mode, if you set a target tempo that is smaller than a tenth of the original tempo,
all parameter will turn to red and the
APPLY
button will be disabled. Set a higher target
tempo to enable the
APPLY
button again!
►
Once you have set the parameters to the desired values, click
APPLY
to apply the pitch
shifting and/or time stretching to the selected region in the Sample, or
CLOSE
to let the
Sample untouched.
11.2.3 Slicing a Sample (Software)
Slicing allows you to chop up loops to be able to extract single Sounds (the drum sounds of a
drum loop for example), but is also good for preparing a loop to be played back at another than
the original tempo without changing its pitch or timing.
If your Sound contains more than one Sample, all your actions in the
SLICE
page will af-
fect the Sample of the Zone currently selected in the
MAP
page! See
for more info on selecting Zones in the
MAP
page.
→
You can see that your loop now has a couple of equally spread vertical lines in the wave-
form: this is where the Slices are going to be applied (i.e. cut).
You can select and listen to individual Slices by clicking on their waveform.
Sampling and Sample Mapping
Controlling Sampling from the Software
MASCHINE MIKRO MK2 - Manual - 303
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
