The Scene Position marker underneath the Scene slot.
10.4.2 Selecting a Loop Range
The basic rule is: A single selected Scene is always looping automatically.
But MASCHINE also allows you to select several consecutive Scenes and play them one after
the other in a loop. Here is how to select the desired range of Scenes.
Hardware
On your controller:
1.
Press and hold
SCENE
to enter Scene mode (or pin it by pressing
SCENE
+ Button 1).
2.
Press and hold the pad corresponding to the start Scene.
3.
While holding the first pad, press the pad corresponding to the end Scene.
→
The start and end Scenes along with all Scenes in-between are played one after the other
in a loop. On your controller, the pads corresponding to all these Scenes are fully lit to
indicate the loop range.
You can also quickly select all Scenes in one go:
►
Press
SCENE
+ Button 2 (
ALL
) to include all available Scenes in the loop.
Software
The Arranger provides a timeline located under the slot labels that always show the current
loop range:
The Arranger timeline showing that the single Scene Pt A is looped.
To select another loop range:
Creating a Song using Scenes
Playing with Scenes
MASCHINE MIKRO MK2 - Manual - 273
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
