9.1
Applying Effects to a Sound, a Group or the Master
The procedures for applying an effect at the Sound, Group or Master level are very similar.
Hardware
1.
Press the
CONTROL
button to select the Control mode.
2.
If you want to apply the effect to the Master (to process the audio of the whole Project),
press Button 1 to select the
MASTER
tab.
3.
If you want to apply the effect to a Group (to process the audio of the whole Group), press
Button 2 to select the
GROUP
tab and press the Group button
A
–
H
corresponding to the
desired Group.
4.
If you want to apply the effect to a Sound, press Button 3 to select the
SOUND
tab, press
the Group button
A
–
H
of the Group containing that Sound, and press
SELECT
+ the pad
of that Sound (or simply hit its pad if pads are in Group mode).
5.
Make sure
MODULES
(Button 4) is activated to show Module slots
1
to
4
on the right dis-
play.
6.
Press Button 5–8 to select Module slot
1
–
4
(Module slot
3
of a Group in the example un-
derneath).
7.
Press
SHIFT
+
BROWSE
to open the Module list and browse the available effect Modules.
8.
On the left display, use Knob 1 to set the
TYPE
to
INTERNAL
for MASCHINE effects or
PLUG-IN
for VST/AU effect plug-ins.
The right display now shows the list of the corresponding Modules (MASCHINE effects in
the example underneath).
9.
Turn Knob 5 to browse the available Modules.
Using Effects
Applying Effects to a Sound, a Group or the Master
MASCHINE MIKRO MK2 - Manual - 245
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
