manualshive.com logo in svg

Native Instruments MASCHINE MIKRO MK2, Manual

Share
Download
Native Instruments MASCHINE MIKRO MK2 Manual Download Page 292

Page 2: Velocity Settings

The MAP page on the controller, page 2 of 3: velocity settings.

Parameter

Description

LOW

Dial Knob 1 to define the lowest velocity for the Zone.

HIGH

Dial Knob 2 to define the highest velocity for the Zone.

Page 3: Tune, Gain, and Pan Settings

The MAP page on the controller, page 3 of 3: tune, gain, and pan settings.

Parameter

Description

TUNE

Tune control for the Zone (Knob 1).

GAIN

Volume level for the Zone (Knob 2).

PAN

Panorama position for the Zone (Knob 3).

11.2 Controlling Sampling from the Software

 

11.2.1 Recording a Sample (Software)

 

To record a Sample in the software, do the following:
1.

Choose an empty Sound slot to record into by clicking it in the Pattern Editor.

Sampling and Sample Mapping

Controlling Sampling from the Software

 

MASCHINE MIKRO MK2 - Manual - 292

Summary of Contents for MASCHINE MIKRO MK2








































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands