manualshive.com logo in svg

Native Instruments MASCHINE MIKRO MK2, Manual

Share
Download
Native Instruments MASCHINE MIKRO MK2 Manual Download Page 288

Preparing the Slices

The SLICE page on the controller.

Parameter

Description

MODE

Using Knob 1, you can select either 

SPLIT

, 

GRID

 or 

DETECT

.

SPLIT: In Split mode, the Sample will be sliced into equally spread Slices.

GRID: In Grid mode, the Sample will be sliced according to note values.

DETECT: In Detect mode, the Sample will be sliced according to its transients.

The following parameter will vary according to the selected mode.

SLICES

(Split mode only)

Here you can choose how many Slices you want the Sample to be split into: 4,
8, 16 or 32.

LENGTH

(Grid mode only)

Select the note value using Knob 2: available lengths are 4th, 8th, 16th and
32nd notes.

SENS

(Detect mode only)

Sensitivity parameter for the transient recognition (Knob 2). Higher values will
cause more Slices to be detected because more transients will be recognized,
lower values will result in less slices. This parameter should be adjusted until all
the musically significant slices are being detected in the right display.

TEMPO

Determines the tempo of the Sample: available options are 

AUTO

 and 

MANUAL

.

BPM

Shows the tempo based on the 

TEMPO

 parameter above; if 

MANUAL

 is selected,

you can dial in a tempo value using Knob 4; if 

AUTO

 is selected, you can choose

from multiples of the tempo calculated by MASCHINE.

EDIT

You can edit separate Slices using the Edit mode. Press Button 5 to enter Edit
mode (see paragraph below).

Edit Mode

In Edit mode you can select and fine-tune each particular Slice.

►

On the 

SLICE

 page of the Sampling mode, press Button 5 (

EDIT

) to enter Edit mode.

Sampling and Sample Mapping

Controlling Sampling from the Hardware

 

MASCHINE MIKRO MK2 - Manual - 288

Summary of Contents for MASCHINE MIKRO MK2








































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands