Following parameters are available:
Parameter
Description
PITCH section
Pitch shifting parameters.
TUNE
Adjusts the detuning (pitch shifting) to be applied (in semitones). Leave this value
to
0
to leave the original pitch untouched.
FORMANT C
(Formant Correction)
Enables/disables the formant correction. Formant correction allows the pitch-shift-
ed audio to retain the timbre (or “color”) of the original audio as much as possi-
ble. This is especially useful for melodic instruments.
SRC TIME section
Time stretching: parameters for the source (original) audio.
MODE
Selects from the two available time shifting modes.
BEAT: In Beat mode, the new tempo is defined relatively to the time signature (the
beats and bars) of the original audio. This can be useful if you sampled a loop
with a clearly defined rhythm (e.g., a drum loop).
FREE: In Free mode, the new tempo is defined independently from the time signa-
ture of the source. This is more suited for non-rhythmic Samples. In this mode on-
ly one parameter is available:
SPEED
(see below).
AUTO DTCT
(Beat mode only)
If
AUTO DTCT
(Auto Detection) is enabled, MASCHINE automatically detects the
tempo of the original audio.
SRC
(Beat mode only)
SRC
(Source BPM) allows to define the tempo of the original audio (in BPM). This
tempo is defined in different ways according to the
AUTO DTCT
value:
If
AUTO DTCT
is enabled, you can set the length (in bars) of the original audio.
You can choose between 1, 2, and 4 bars. The number between brackets indicates
the resulting tempo (in BPM) derived from the number of bars you have set and
the computed tempo value.
If
AUTO DTCT
is disabled, you can directly define the tempo of the original audio
(in BPM).
NEW TIME section
Time stretching: parameters for the target (pitch-shifted) audio.
NEW BPM
(Beat mode only)
Defines the target tempo of the time-shifted audio (in BPM).
Sampling and Sample Mapping
Controlling Sampling from the Hardware
MASCHINE MIKRO MK2 - Manual - 286
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
