Native Instruments MASCHINE MIKRO MK2, Manual

Page: 289 / 359

The Edit mode in the SLICE page.
Parameter Description
SELECTION section
SLICE Choose the Slice you want to edit by dialing Knob 1 here; the display will show
you which Slice is currently selected. You can also use the pads to select Slices
starting from pad 1.
SLICE section
START Here you can adjust the start point of a Slice using Knob 3. Hold SHIFT when
turning the Knob to adjust the parameter in finer increments.
END This lets you edit the end point of a Slice using Knob 4. Hold SHIFT when turn-
ing the Knob to adjust the parameter in finer increments.
Button 6–8
RESET Reset your Slice edits using Button 6.
ADD Add another Slice according to the current Mode settings using Button 7.
REMOVE Remove the selected Slice using Button 8.
►
After you have performed your Slice edits, confirm them by pressing Button 5 again to
return to the
SLICE page ( EDIT turns off).
Exporting the Slices
To actually perform the slicing according to the settings described in the previous paragraphs,
you need to press Button 7 (
APPLY TO ) or Button 8 ( APPLY ).
Sampling and Sample Mapping
Controlling Sampling from the Hardware
MASCHINE MIKRO MK2 - Manual - 289