manualshive.com logo in svg

Native Instruments MASCHINE MIKRO MK2, Manual

Share
Download
Native Instruments MASCHINE MIKRO MK2 Manual Download Page 127

4.6.1

Mute and Solo on the Hardware

 

Soloing Sounds and Groups

1.

Press 

SOLO

 and hold it.

Your controller switches to Solo mode.

2.

Solo Sounds by pressing their pads, and Groups by pressing their Group buttons.

Instead of holding 

SOLO

, you can also pin the Solo mode by pressing 

SOLO

 + Button 1.

You can then release 

SOLO

: Your controller will stay in Solo mode until you press 

SOLO

again. See section 

↑

2.2.8, Pinning a Mode

 for more info.

There are two more functions in Solo mode:

▪

ALL ON

 (Button 3) turns all Sounds on.

▪

NONE

 (Button 4) turns all Sounds off in the selected Group.

The Solo mode on the controller.

Muting Sounds and Groups

Mute works in the same way as Solo:
1.

Hold 

MUTE

.

Your controller switches to Mute mode.

2.

Mute Sounds by pressing their pads, and Groups by pressing their Group buttons.

Instead of holding 

MUTE

, you can also pin the Mute mode by pressing 

MUTE

 + Button 1.

You can then release 

MUTE

: Your controller will stay in Mute mode until you press 

MUTE

again. See section 

↑

2.2.8, Pinning a Mode

 for more info.

Like in Solo mode, there are two more functions in Mute mode:

▪

ALL ON

 (Button 3) turns all Sounds on.

Working with Sounds

Mute and Solo

 

MASCHINE MIKRO MK2 - Manual - 127

Summary of Contents for MASCHINE MIKRO MK2








































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands