Saving VST/AU Presets as Module Presets
Once you have loaded a VST/AU preset for a plug-in, you can save it as a Module preset via the
Save As…
or
Save As Default…
commands of the Module menu (see section
). Once this is done, your VST/AU preset will be available in the MASCHINE
Browser among the other Module presets.
4.4
The Sound Properties
This section describes the Properties available at the Sound level. Properties are global set-
tings that apply to the Sound independently of which Modules are loaded in the Sound’s Mod-
ule slots.
4.4.1
Selecting a Set of Properties
Properties are organized into sets. Available sets of Properties differ between the Sound,
Group, and Master level. Here we describe how to select a particular set of Properties at the
Sound level, but the procedure is the same at the Group and Master levels.
At the Sound level, following sets of Properties are available:
▪
Groove Properties
▪
Output Properties
Hardware
To select a particular set of Properties for a Sound on your controller:
1.
Press the
CONTROL
button to enter the Control mode.
2.
Press Button 3 to put the focus on the
SOUND
tab.
3.
Press
SELECT
+ the pad corresponding to the Sound containing the properties you want
to display.
4.
Make sure
MODULES
(Button 4) is
deactivated
to show the Sound Properties.
5.
Press Button 6 (
GRV
) or 8 (
OUT
) to select the Groove Properties or Output Properties, re-
spectively.
→
The corresponding Properties are shown in the displays of your controller.
Working with Sounds
The Sound Properties
MASCHINE MIKRO MK2 - Manual - 114
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
