Parameter
Description
DELETE
All recorded Samples are stored in the Recording History. When the recording
has stopped, press Button 6 (
DELETE
) to delete the selected Sample from the
Recording History.
PREV
Press Button 7 (
PREV
) to select the previous Sample from the Recording History
if you have recorded more than one Sample in the Sound slot.
Note: to play the Sample, just press the pad representing the Sound slot you
used for sampling.
NEXT
Press Button 8 (
NEXT
) to select the next Sample from the Recording History if
you have recorded more than one Sample in the Sound slot.
If you want to start and stop the recording manually, leave the
MODE
set to
DETECT
, dial
the
THRESHOLD
down to
OFF
and start the recording by pressing
START
(Button 5). To
stop recording, press
STOP
(Button 5).
As soon as you have recorded a Sample, the Sampler Module is automatically loaded into Mod-
ule slot 1 of the Sound, and your Sample can be played back by pressing the corresponding
pad on your controller.
The recorded Sample is shown on the right display (here with the Playhead indicator).
The right display shows you the waveform of the recorded Sample. When the Sample is played
back, the Playhead indicator (vertical line) shows you the current play position within the
waveform.
Location and Name of Your Recorded Samples
By default, recorded Samples are saved in the Recordings subfolder of your Standard User Di-
rectory, as defined on the
User Paths
page of the Preferences window (see
). If you activate the
Prefer Project Folder
option on the
General Page
of the
Preferences window (see
2.4.1, Preferences – General Page
), recorded Samples will be saved
instead in a Recordings subfolder of the folder where your current Project is saved.
Recorded Samples are automatically named using the following scheme:
Sampling and Sample Mapping
Controlling Sampling from the Hardware
MASCHINE MIKRO MK2 - Manual - 281
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
