manualshive.com logo in svg

Native Instruments MASCHINE MIKRO MK2, Manual

Share
Download
Native Instruments MASCHINE MIKRO MK2 Manual Download Page 181

Pad state

Description

Off

There is no note at that pitch for the current Sound in the Pattern.

Dimmed

There is at least one note at that pitch for the current Sound in the Pattern (but it

is not necessarily within the current selection).

Fully lit

All notes at that pitch are included in the current selection.

The total number of notes/events included in the current selection is shown in the right dis-

play.

Quick Edits on Selected Events

The Select mode also provides you with a few essential editing functions controlled by Knobs
5–8. These functions will be applied to the current selection of events/notes.

Editing Tool

Description

Knob 5 (

POSITION

)

Shifts the selected events on the timeline by one-step-long increments (reachable
locations thus depend on the current Step Grid resolution). If one event only is se-
lected, its position is shown under 

POSITION

. If several events are selected, the

field shows 

(MULTI)

.

Knob 6 (

LENGTH

)

Adjusts the length of the selected events by one-step-long increments (possible re-
sizings thus depend on the current Step Grid resolution). If the events have differ-
ent lengths, the length differences are retained as long as no event becomes short-
er than one step. If one event only is selected, its length is shown under 

LENGTH

.

If several events are selected, the field shows 

(MULTI)

.

Knob 7 (

PITCH

)

Transposes the selected events by semitones. If one event only is selected, its
pitch is shown under 

PITCH

. If several events are selected, the field shows 

(MUL-

TI)

.

Knob 8 (

VELOCITY

)

Adjusts the velocity of the selected events. If the events have different velocities,
the velocities differences are retained as long as the limits (0 and 127) are not
reached. If one event only is selected, its velocity is shown under 

PITCH

. If several

events are selected, the field shows 

(MULTI)

.

You can also use these editing functions to quickly create variations of your Patterns during
a live performance!

The following sections will show you other editing functions available from your pads.

Working with Patterns (Controller)

Editing Patterns

 

MASCHINE MIKRO MK2 - Manual - 181

Summary of Contents for MASCHINE MIKRO MK2








































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands