4.
In the top right part of the Control area, click the arrow on the right of the tab of the de-
sired Module slot
1
–
4
(in the example underneath we choose Module slot
2
of a Sound).
The Module menu opens and shows a list of all available effects.
5.
Click the desired entry in the list. If you have VST/AU effect plug-ins installed you may
also load them from the menu by selecting the
Plug-ins
submenu near the bottom of the
list.
→
Upon your selection the effect is loaded and its parameters are displayed in the Parame-
ter area below (in the example underneath we selected the
Phaser
effect in the Module
menu).
Loading a Module will replace any Module previously loaded in the Module slot.
For more information on editing effect parameters, please read
.
If you created a nice effect setting, you can put it to further use by saving it as a Module
preset. Please read
for more details.
Using Effects
Applying Effects to a Sound, a Group or the Master
MASCHINE MIKRO MK2 - Manual - 248
Summary of Contents for MASCHINE MIKRO MK2
Page 1: ...Manual...
