manualshive.com logo in svg

Native Instruments MASCHINE MIKRO MK2, Manual

Share
Download
Native Instruments MASCHINE MIKRO MK2 Manual Download Page 314

Mouse Action

Edit Command

Click a Zone

Selects this Zone. The selected Zone is highlighted. You can
then edit its Sample on the 

EDIT

 page, and even slice it on the

SLICE

 page.

Hold [Shift] and click several Zones

Selects all clicked Zones. This notably allows you to edit param-

eters for several Zones simultaneously.

Click and drag a selection frame in the

Mapping area

Selects all Zones within or overlapping the frame.

Drag the left/right border of a Zone

Adjusts the Zone’s key range in which the Sample will be trig-
gered.

Drag the higher/lower border of a Zone

Adjusts the Zone’s velocity range in which the Sample will be
triggered.

Drag a corner of a Zone

Simultaneously adjusts the lowest/highest note and the lowest/
highest velocity of the Zone (depending on the corner).

Click inside a Zone and drag

Moves the Zone across the Mapping area.

Double-click a Zone

Opens its Sample in the 

EDIT

 page for editing.

For  more  info  on  the 

EDIT

  and 

SLICE

  pages,  please  refer  to  section 

↑

11.2.2,  Editing  a

Sample (Software)

 and 

↑

11.2.3, Slicing a Sample (Software)

, respectively.

Sampling and Sample Mapping

Controlling Sampling from the Software

 

MASCHINE MIKRO MK2 - Manual - 314

Summary of Contents for MASCHINE MIKRO MK2








































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands