Home
/
Miranda
/
Kaleido-X (4RU)
/
User Manual

Miranda Kaleido-X (4RU), User Manual, Page: 95 / 388

Share

Page: 95 / 388

Miranda Kaleido-X (4RU) User Manual Download Page 95

Connecting to a Kaleido-X System

85

Connecting to a Kaleido-X System

To connect to a Kaleido-X system:

1. On the Configure menu, click Connect.

The IP Address window appears.

IP addresses for all the Kaleido-X systems that are on the same subnet as your PC are included in the
list.

2. If your PC and the Kaleido-X are on the same subnet, then you can select the IP address of the Kaleido-

X system you wish to connect to from the list. Otherwise type the appropriate IP address in the box.

3. Click OK.

The selected system’s hierarchical list appears in XEdit’s main pane, showing the frame type, frame
name and IP address, and the status bar shows the connection status.

Connection status

Frame type Frame name Frame IP address

«
...
93
94
95
96
97
...
»

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments