Miranda Kaleido-X (4RU), User Manual, Page: 342 / 388

332
Third-Party Devices
13
9. Select the RS-422 port that is connected to the Kaleido-X, and set its serial protocol options as follows:
Notes
• Refer to the Kahuna User Instruction Manual for further details on setting up the port protocols and tally
protocol parameters.
1
• Although it is possible to define “user configuration” source names on the Kahuna switcher, these are
not transmitted over the serial tally interface. The switcher only transmits the “engineering
configuration” source names.
To set up the Kaleido-X:
1. Launch XEdit.
2. In the main window, click the System tab, and then click Description/Calibrations on the second-level
tab bar. The main pane displays the System hierarchical list, and the Tools pane displays the equipment
library when the root of the System list is selected.
3. Drag the Kahuna production switcher device from the equipment library onto the root of the System
hierarchical list. Alternatively, right-click the list root, and then click Insert Kahuna on the shortcut
menu.
A window appears, prompting you for a device identifier.
Device identifier input window
4. Type a name for the Kahuna production switcher in the Enter device identifier field, and click OK.
5. Click the Interconnects tab.
6. Position the pointer over the Kaleido-X frame icon, then click and drag towards the Kahuna production
switcher icon.
Extension Enable On
Full Table Enable On
1.The Kahuna User Instruction Manual is available here:
https://www.snellwilcox.com/kahunaclub/kahunacare/documents.php