manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 225 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 225

Configuring Audio Scales

215

To configure audio metadata:

1. In XEdit, under the 

Layouts

 tab, select the audio meter widget for which you wish to apply audio 

metadata settings, then click the 

Properties

 tab:

2. Choose the source associated with this audio meter from the 

Audio format

 list (Auto, PCM, Dolby E or 

Dolby VANC):

Note: 

If the actual audio source assigned to this audio meter is not of the same format configured here, 

then the audio data will not be shown.

3. Choose an 

Audio level

:

4. Choose a value from the 

Channels

 list to indicate which channel to display:

If the 

Audio format

 is set to 

PCM

, then the available choices are 

left

, 

right

 and 

stereo

.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments