Miranda Kaleido-X (4RU), User Manual, Page: 323 / 388

313
To configure internal router card expansion:
1. Launch XEdit and open the database associated with the Kaleido-X expansion system for which you
wish to configure router card expansion.
2. In the System list, add router cards to the OPTION slots in each frame (this procedure describes the case
where two cards in one frame are connected to two more in the second frame, but it is also possible to
connect only one card per frame):
XEdit creates a physical router corresponding to each card, and two logical routers (one for each frame),
instead of one large logical router. This is because the sources of one Kaleido-X do not enter the router
of the other Kaleido-X. The signals do not pass via the frame expansion cable. For this reason, it is not
possible to create a large, combined router—since some sources cannot go to some destinations, this
would create holes in the router matrix.