manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 218 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 218

208

Creating Layouts

9

Setting a Video Widget’s Text Mode

Note: 

Closed captioning/subtitling text services can be enabled by purchasing the Extraction of CC, 

Subtitling and XDS data option. One key is needed per input card, and the CC 608, CC 708, XDS and 
Subtitling WST are all activated as a single option. See “Enabling Options” on page 359 for more 
information.

To set the subtitling properties of a video widget, do the following:

1. In XEdit, open a layout and click the video widget for which you wish to specify subtitling properties:

The 

CC/Subtitling

 settings appear in the 

Properties

 tab.

2. Select the 

Text enabled

 check box:

3. Choose a value from the drop-down menu beside 

Text mode

:

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments