manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 93 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 93

Opening the XEdit Software

83

3. From the window that opens, locate an appropriate directory for your workspace, and then click 

Open

 

to close the 

Select the database location

 window.

If it is not the first time you open XEdit, and you are satisfied with the location of your local workspace, 
then select the 

Don’t ask next time 

check box, to avoid being prompted every time you open XEdit.

4. Click OK to close the 

Database Location

 window.

The XEdit main window appears. This may take a few seconds.

When first opening XEdit in offline mode, the database contains the default configuration for a 
Kaleido-X (7RU) system, including a fully-populated frame (all cards present) and a set of factory 
channels.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments