Miranda Kaleido-X (4RU), User Manual, Page: 67 / 388

Displaying a Source in Full Screen Mode
57
2. Select the layout to load, from the set of layouts defined for this room.
3. Click Open.
The new layout appears on the monitor wall.
Using Layouts Presets
To toggle layouts using the RCP2’s preset buttons:
• Press the appropriate preset button (1-10) on the RCP2.
The layout associated with the preset button for the current user will be loaded onto the monitor wall.
Note: See “Assigning Room Layouts to an RCP User’s Presets” on page 264 for more details.
Refreshing a Layout
To refresh a layout:
• Right-click the monitor wall, point to Monitor Wall (if you clicked a widget), and then click Refresh on
the shortcut menu.
Locating the Mouse Pointer on the Monitor Wall
If you have a cluster system, the monitor wall may comprise a large number of display screens, where the
mouse pointer location is not always obvious.
To locate the mouse pointer on the monitor wall:
• Click the middle mouse button.
A more recognizable square shape appears around the pointer.
Displaying a Source in Full Screen Mode
To display a source in full screen mode:
1. Move the pointer over the video source you wish to display in full screen mode.
2. Press FULL SCREEN on the RCP2.
The full screen layout is loaded into the full screen zone assigned to the user.