manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 190 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 190

180

Setting Up Rooms

8

Alternatively, right-click anywhere inside the Tools pane’s display library area, and then click New 
display library on the shortcut menu.

Display library shortcut menu

The new display library appears below the default display library area in the Tools pane.

4. Right-click anywhere in the display library area, and then click Save Display Library on the shortcut 

menu.
The Save Display Library window appears.

5. Type a name for the new custom display library, and then click Save.

Custom display libraries are stored separately from the XEdit workspace. They have a

.dlib

 extension.

New (empty) display library

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments