Miranda Kaleido-X (4RU), User Manual, Page: 77 / 388

Changing Crosspoints
67
2. On the shortcut menu, point to Assign channel to [component] (where [component] will be monitor,
video, UMD, tally, audio meter, status alarm, time code, metadata display, or clock, depending on the
widget you clicked)
The current channel assignment has a check mark on the menu, and the input card associated with this
channel appears in italics.
3. Select the appropriate Channel [number].
Changing Crosspoints
The Kaleido-X system features built-in routing which eliminates the need for separate routing in control
rooms. Unprocessed baseband outputs can be provided from any of the HD / SD-SDI inputs to each
processor. These outputs can be used to feed high quality CRT monitors, test equipment such as waveform
scopes, as well as ISO recorders. The outputs can even feed other multi-image display systems.
Independent from its built-in routing capabilities, the Kaleido-X itself can be used as a router, and
controlled as such by any external router control device or software. When configured for such purposes,
the Kaleido-X channels are considered as sources for a router called
KX Router , and the destinations are
either widgets on the monitor wall, or BNC outputs on the KXO-24Router cards.
Changing an External Router Crosspoint
To change an external router crosspoint:
1. Right-click one of the video window on the monitor wall.
Current channel with check box
Current input group in italics