manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 246 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 246

236

Creating Layouts

9

Using the Region Editor

Opening the Region Editor

Note: 

The region editor is part of the expert view. To show the expert view, click the View filters button on 

the Properties pane’s toolbar, and then select the Expert view check box. Using the region editor is not 
recommended. To accomplish most configurations, the standard tools available in the layout editor are 
sufficient.

To open the region editor:

1. Click the widget whose properties you wish to see.

2. In the Properties pane, click the Bounds box, under Size & Position.

Click the button that appeared inside the box to open the Region Editor window.

Region Editor window

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments