manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 65 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 65

Loading Layouts

55

To hide all the dashboards:

•

Right-click anywhere on the monitor, point to Monitor Wall on the shortcut menu (if you clicked a 
widget), and then click Hide all dashboards to hide the dashboard on every monitor in the room.

Note: 

When a dashboard is closed while the system is in an error condition, it will automatically 

reappear after 60 minutes, or when a new error occurs.

Loading Layouts

Loading a Layout by Using the Mouse

To load a layout on the monitor wall, by using the mouse:

1. Right-click the monitor wall background, point to Monitor Wall (if you clicked a widget), and then click 

Load layout on the shortcut menu.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments