manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 36 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 36

26

Getting Started

1

Step 4 – XEdit Installation

The Kaleido-X Layout Editor (XEdit) is used to create layouts and configure the Kaleido-X. When the 
computer with XEdit is connected to the Kaleido-X through a TCP/IP network, you can use XEdit to modify 
layouts and settings directly on the Kaleido-X, or you can work locally on the computer and then export 
your changes to the Kaleido-X.

As of Kaleido-X version 2.10, XEdit is no longer provided as a standalone application. Instead, PC clients can 
download and launch the application directly from the Kaleido-X.

Note: 

You can also download XEdit from the Miranda Technical Support portal. Contact 

[email protected] for details.

To install XEdit, do the following:

1. From a workstation on the same subnet, open a Web browser window and type the IP address of the 

Kaleido-X frame (with Kaleido-X software version 2.10 or later):

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments