Miranda Kaleido-X (4RU), User Manual, Page: 366 / 388

356
Administration and Servicing
16
From Third-Party Devices to Kaleido-X
The following ports must be open on third-party devices (e.g. router controllers):
Router drivers also use default ports:
Note: This is configurable in XEdit—you can choose any UDP or TCP/IP port to use for communications
between the Kaleido-X and an external router.
From Kaleido-X to/from SNMP Devices
Port Transport Notes
2000 TCP Used to control the Kaleido-X internal router via the Pro-Bel SW-P-02 protocol
4381 TCP Used to control the Kaleido-X internal router via the Network protocol
14000 TCP Used to control the Kaleido-X internal router via the Pro-Bel SW-P-08 protocol
Driver Port Transport Notes
ETL 4000 TCP
GVG 7000 Native 12345 TCP
NVision NV9000 9193 TCP
Network modular 4381 TCP
Quintech 9100 TCP
Sony HKSPC 12345 TCP GVGNP Emulator
Utah RCP-3 5001 TCP SC-4 Ethernet
Pro-Bel SW-P-02 2000 TCP
Pro-Bel SW-P-08 14000 TCP
Service Port Transport Notes
SNMP 161 UDP Simple Network Management Protocol, used for communications
between Kaleido-X and third-party devices (e.g. sending get, get-
next, and set commands to an SNMP agent, and receiving the
response).
SNMP 162 UDP Simple Network Management Protocol, used for receiving traps
(alerts) from third-party devices.