manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 35 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 35

Step 3 – Selecting a Default Layout

25

2. If you have not already done so, log on to the Kaleido-X from the RCP2. See “Logging on to the Kaleido-

RCP2” on page 21.

3. Right-click anywhere on the monitor wall, point to Monitor Wall (if you clicked a widget), and then 

click Load layout on the shortcut menu.

Monitor wall shortcut menu

A layout browser appears on the displays associated with the current room. By default, each room is 
associated with one output card. Each default layout is pre-configured to show 16 video streams for 
each input card.

Example of a default layout showing 16 video streams

4. Choose a default layout from the layout browser. 

The video sources should appear on the room displays.

Note: 

You can also use the first 6 LAYOUT PRESETS buttons on the RCP2 to select a default layout.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments