manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 201 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 201

Managing Layouts

191

2. On the File menu, click Copy layout to, point to the appropriate room, and then either select an existing 

layout from the list, or click Empty layout.

Copy layout to menu selection

A two-pane window appears. The left pane represents the source layout, and the right pane represents 
the destination room where the new layout is to be used.

3. Drag one head from the source pane to the destination pane.

4. Repeat until every part of the source layout you wish to copy has been dragged to the appropriate head 

in the destination pane, and then click Copy layout.
The Save Layout window appears.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments