manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 214 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 214

204

Creating Layouts

9

•

Video raster follows AFD/WSS

: A video widget can be configured so that WSS, AFD VI or AFD 2016 

metadata is used to crop (and/or add black bars to) the video signal, giving the video raster the correct 
aspect ratio. This metadata can be reported as friendly text inside a UMD. Its presence can also be made 
available in alarms as well as via SNMP traps.

The Automatic Aspect Ratio feature can be configured for each video input on a Kaleido-X.

To slave a video widget to the input signal aspect ratio:

1. In XEdit, under the 

Layouts

 tab, select the video widget for which you wish to apply automatic format 

detection (OFF by default):

Term

Definition

Video raster

Video signal that is displayed inside the video widget on a monitor wall

AFD VI

Active Format Descriptor encoded in the Video Index

AFD 2016

Active Format Descriptor encoded in the ancillary (according to SMPTE-2016)

WSS

Wide Screen Signaling

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments