manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 63 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 63

Displaying the Dashboard

53

Displaying the Dashboard

Whenever your Kaleido-X detects an error, it will automatically display the dashboard on every monitor of 
the monitor wall. When all errors are resolved, then the system automatically closes the dashboard on 
every monitor. You can also display the dashboard as needed, to view the Kaleido-X system name, IP 
address, software version and current error messages. In such cases you must close the dashboard 
manually.

Note: 

It is possible to disable the automatic display of the dashboard on specific displays. See “Disabling 

the Dashboard” on page 179 for details on how to configure this option.

To display the dashboard:

1. Right-click anywhere on a monitor. On the shortcut menu, point to Monitor Wall, and then click Show 

dashboard to display the dashboard associated with the current head.

Monitor wall shortcut menu (from composite widget shortcut menu)

Note: 

If you right-click the monitor wall background directly, then the monitor wall shortcut menu 

appears immediately, and you can click Show dashboard directly:

Monitor wall shortcut menu

Show dashboard

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments