manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 136 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 136

126

Calibrating the Kaleido-X

5

2. On the Configure menu, click Connect, if you wish to apply the changes in real time. If the connection 

succeeds, “Connected to [IP address]” will appear in the status bar.

Note: 

If this step is omitted, then you will need to export the database to apply the calibration 

changes.

3. Expand the System root, and the Kaleido-X frame. 

Note: 

In the case of an expansion system, then you need to first expand the dual frame element, under 

which both frames A and B are listed.

4. Expand the appropriate input card, and select 

Loudness - Dialnorm

.

5. Click the 

Properties

 tab, and set the appropriate values for your installation.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments