Miranda Kaleido-X (4RU), User Manual, Page: 228 / 388

218
Creating Layouts
9
4. Choose the appropriate mode from the Timer mode list:
Up : The timer counts up starting from zero up to the Preset time.
Down : The timer counts down from the Preset time to zero.
Remaining : The timer counts down from the current time until it reaches the Preset time. This mode
is a one-shot mode—the timer will not automatically restart the next day at the same start time. To
restart it, you must either reset the timer widget on the monitor wall, or set and specify a new start
time.
5. Choose a Timer end (i.e. what happens when the timer reaches the end of its countdown period) from
the drop-down menu:
Loop : The timer restarts and repeats its cycle (not available with the Remaining timer mode).
Stop : The timer stops.
Overrun : The timer counts through its specified end point, and then continues (when Overrun is
specified, the timer always counts up).
6. If you chose Loop as a timer end, specify the number of times the loop should repeat:
7. Specify a Preset duration: