manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 207 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 207

Configuring Video Widgets

197

Configuring Video Widgets

Resizing a video widget

To resize a video widget:

•

Drag any of the corner handles, inwards or outwards.

The video widget, and the associated video view, will become smaller or larger, and they will both keep 
their aspect ratio.

•

Drag any of the side handles, inwards or outwards.

The bounds of the video widget will change, while the video view will still keep its aspect ratio.

•

Change the aspect ratio property of the video widget. See “Setting a Video Widget’s Aspect Ratio” 
below.

The video widget will keep its bounds, and the video view will be resized to fill as much of the video 
widget area as possible, given the new aspect ratio.

Setting a Video Widget’s Aspect Ratio

To set a video widget’s aspect ratio:

1. Click the video widget whose aspect ratio you wish to configure.

Video widget with an aspect ratio of 16:9

Note: 

Double-click the video, if is part of a composite widget.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments