manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 192 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 192

182

Setting Up Rooms

8

Closing Display Libraries

To close a display library:

•

Once the custom library is saved, you can right-click in the library area, and then click Close display 
library on the shortcut menu.
Alternatively, click Close display library, on the File menu.

Opening Display Libraries

To open a custom display library:

•

Right-click anywhere in the display library area on the Tools tab, and then click Open display library on 
the shortcut menu. Alternatively, click Open display library, on the File menu.

Note: 

It is possible to have multiple custom libraries open at the same time.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments