manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 45 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 45

Step 5 – System Verification

35

The XAdmin 

Status and Options

 page appears, displaying a list of all cards and their statuses.

Cards are presented in the order they appear, from left to right when looking at the front of the chassis. 
The heading rows show the card type, serial number, firmware and safemode versions, a card status 
indicator, and input signal status indicators. The card status indicator shows whether the card is 
running normally (green) or in safe mode (red). The signal status indicators reveals the presence of a 
valid input signal at the corresponding connector.

4. Move the pointer to an input signal status indicator to view the associated signal format.

Card type

Serial number

Version information
Input signal status

Input signal format

Status indicator

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments