Miranda Kaleido-X (4RU) User Manual Download Page 220

Page: 220 / 388

210

Creating Layouts

4. Under Assignments, click the Audio format box, and then select the appropriate format from the list.

Note:

See “Configuring Audio Metadata” on page 214 for more information.

5. Make the appropriate assignments and set the other attributes, as needed.

Note:

See “Creating Actions” on page 243 for more information.

Configuring Audio Scales

You can configure audio scales in two ways: either globally, from the Tools menu, or by clicking a specific
audio meter widget in a layout.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Search results

Summary of Contents for Kaleido-X (4RU)

Reviews:

Miranda Kaleido-X (4RU), User Manual, Page: 220 / 388

Search results

Summary of Contents for Kaleido-X (4RU)

Reviews: