Home
/
Miranda
/
Kaleido-X (4RU)
/
User Manual

Miranda Kaleido-X (4RU), User Manual, Page: 215 / 388

Share

Page: 215 / 388

Miranda Kaleido-X (4RU) User Manual Download Page 215

Configuring Video Widgets

205

2. Choose a value from the drop-down menu labeled

Automatic Aspect Ratio

(OFF, Follow Input Format

or Follow Input Format and AFD Coded Frame):

If the Automatic Aspect Ratio property is set to

Follow Input Format

, then the video widget will

change its aspect ratio to match that of the input feed.
If the Automatic Aspect Ratio property is set to

Follow Input Format and AFD Coded Frame

, then the

video widget will change its aspect ratio according to the AFD Coded Frame. If there is no AFD present,
the default value for the current format (i.e. Default HD AFD Value if the input is HD, or Default SD AFD/
WSS Value is the input is not HD) is used. If the Default is None, then the input feed aspect ratio is used.

3. Click the

Save

button.

To have a video raster to follow a video signal’s AFD/WSS metadata:

1. Click to put a check mark in the box labeled

Follow AFD/WSS

.

«
...
213
214
215
216
217
...
»

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments