manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 69 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 69

Video Cropping/Zooming

59

Video Cropping/Zooming

To toggle the cropping mode using the RCP2:

•

To change the current cropping mode, move the mouse pointer over the video signal you wish to 
change, and then press the UNDERSCAN button on the RCP2. Continue pressing UNDERSCAN to toggle 
between underscan and overscan mode.

To toggle the cropping mode using the mouse:

•

Right-click the video source.
If the video is in underscan mode, then the shortcut menu will allow you to change to overscan:

If the video is in overscan mode, then the shortcut menu will allow you to change to underscan:

Notes

• The overscan margins are set to 5% by default. They can be customized in XEdit.

• Safe title area and aspect ratio markers follow the video signal (e.g. if the safe title is within 5% of top, 

left, right and bottom, then when the video is in default overscan mode, the safe title will not appear).

Toggling Safe Area Markers

To toggle the safe area markers on a video using the RCP2:

•

Move the pointer over the video source, and then press SAFE AREA on the RCP2. Continue pressing SAFE 
AREA to toggle the markers.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments