Miranda Kaleido-X (4RU), User Manual, Page: 144 / 388

134
Calibrating the Kaleido-X
5
5. Under WST - Teletext Alarms, expand the Page A element, and then click Page selection.
6. In the Properties pane, type the page number you wish to be the default selection for Page A, in the
Teletext Page A Selection box. Alternatively, use the slider to set the page number.
7. Click Apply to all if you wish this setting to be the default Page A selection for every video signal on
your system.
8. Repeat the procedure for the Page B, C, and D elements.
Note: On the monitor wall, only Page A will be available with the associated video signal. However,
alarms can be configured for all four preset pages. See “Configuring Alarm Debouncing” on page 145
for instructions on how to configure an alarm.
9. On the File menu, click Save. Alternatively, click the Save button on the toolbar.
Calibrating Metadata Holding Time
To calibrate metadata holding time:
1. Click the System tab in the main window.
2. On the Configure menu, click Connect, if you wish to apply the changes in real time. If the connection
succeeds, “Connected to [IP address]” will appear in the status bar.
Note: If this step is omitted, then you will need to export the database to apply the calibration
changes.
3. Expand the System root, and the Kaleido-X frame.
Note: In the case of an expansion system, then you need to first expand the dual frame element, under
which both frames A and B are listed.